 
|
 |
| Due to customer
requests for Skid steer tractor accessories, CADplans Corp now offers these new plans. |
|
|
 
CADDigger Model
609
|
CADDigger Model 609 is a backhoe with 60" of
digging depth that is designed for quick attachment on most late model skid steer
machines. Install or remove CADDigger Model 609 with the ease of any other quick hitch
attachment like the bucket.
CADDigger Model 609 will perform the same
tasks that you can do with the expensive ready-made machines.
Bucket Options
The CADDigger Model 609 can be built in two bucket
configurations. Build a narrow bucket for trenching or a standard bucket for regular
digging. Change buckets by pulling two pins. Both these options are described in detail in
the drawing package.
|
|
CADDigger Model 809
|
CADDigger Model 809 is a backhoe with 9 feet of
digging depth that is designed for quick attachment on most late model skid steer machines
with a bucket lifting capacity greater than 1200 pounds. Install or remove CADDigger Model
809 with the ease of any other quick hitch attachment like the bucket.
CADDigger Model 809 will perform the same
tasks that you can do with the expensive ready-made machines.
Bucket Options
The CADDigger Model 809 can be built in two bucket
configurations. Build a narrow bucket for trenching or a standard bucket for regular
digging. Change buckets by pulling two pins. Both these options are described in detail in
the drawing package.
|
|
CADBucket Model
404
|
Eliminate the high cost of replacement
buckets for your skid steer machine. Using the CADBucket plans you can quickly build the
replacement or extra bucket you need. Now you can have a toothed bucket and a plain edge
bucket for only a few hundred dollars rather than the high cost of ready made buckets.
Using the Metco kit for this bucket, construction time is only a couple of hours and you
save hundreds of dollars. The 3/16 inch steel shell is heavier than many replacement
buckets. All cutting edges are reenforced high carbon steel. The plans include two
designs, one using a preformed shell, the other is made from all flat stock with no bends.
The plans are for a 60" bucket, but you can easily vary the width to make the bucket
the size you need. Details are for mounting on most late model skid steers. You can adapt
the mount if you have an older design. If you get steel for $0.40 per pound this bucket
can be built for as little as $80, saving $500 to $700 over purchased buckets.
|
|
CADDigger Model 408
|
CADDigger is a kittyCAD version of our CADDigger that is low cost to build
but gives you tiger strength ripping power. Being low cost to build and own, you eliminate
rental charges and transportation costs of full size rental backhoe attachments. This
attachment turns your skid steer machine into a backhoe. With a digging depth of 4 feet
and 4000 pounds of ripping power CADDigger turns your skid steer machine into a powerful
backhoe. Installation is as quick and easy as changing buckets. The attachments low weight
and small size makes it easy to always have this mini backhoe on the trailer ready to do
those quick trenching jobs you run into. No need to go back and get the full-size backhoe
attachment. Eliminate the backhoe rentals for those quick trenching jobs. In fact,
CADDigger can pay for itself in one job if you factor in rental costs and time lost
getting and returning that rental backhoe. CADDigger is a mini backhoe that is designed for the quick trenching job
plumbers, landscapers and electricians always run into. CADDigger can be built as a
hydraulic version or an unpowered bucket with various fixed positions for the bucket,
allowing this attachment to be used on machines that are or aren’t equipped with
auxiliary hydraulics.
|
|
Grapple, Model
402
|
Grapple is an attachment for your skid steer tractor that lets you grab items
such as brush or logs with the hydraulic hooks. This attachment attaches like the  bucket and the hooks are actuated by your skid steers auxillary
hydraulics. When you want to dump simply lift the hooks and dump as you would dump the
bucket. The Grapple will also handle most pallets.
|
|