MODEL 1207
Sized for 25-50HP Tractors. 3,500
pound Machine Weight.
|
| CADPlans has developed model
907,1007 and 1207 loaders
sized to fit almost any tractor from the "mini diesel" to 50 HP and they can be
built by the homeowner or farmer. NO machining is neessary using only the common hand
tools. The Model 907 fits your "mini diesel"; the
1007 fits the 17HP to 25HP and
the 1207 fits the 25HP to 50HP tractors. These loaders are all high profile designs
giving clearance for the large front tires on 4-wheel tractors, as well as fitting 2-wheel
drive tractors. Designed with heavy section materials and greasable bearings, the
CADLoaders give you the strength and long life you expect. With a simple mounting design, these loaders can quickly be
attached to your tractor. Assembly with the available kits decreases assembly time to as
little as 50 hours. Low cost, easily available components insures simple construction.
Three models to choose from lets one of these machines fit your needs. You are quickly
productive with a low investment. |
| |
| CADLoader
Model 1207 Technical Specifications |
| Loading Height |
108" |
Hydraulic Flow Recommended |
10 GPM |
Hydraulic Pump |
Tractor |
| Lifting Power |
3,000 lbs. |
Hydraulic Pressure |
2,000 PSI |
|
or Optional |
| Reach |
75" |
Number of Cylinders |
4 |
Oil Tank |
Optional |
| Bucket Rolldown Angle |
40 degrees |
Digging Depth, Bucket Level |
6" |
Recommended Tractor |
25 to 50 HP |
| Hydraulic Requirement Min. |
8 GPM |
Approx. Cost of Parts |
$600-$1,400 |
- |
- |
|
| NOTICE: as CADplans cannot
control the skills of the builder, or the end use of the machine, CADplans makes no
warranty stated or implied and the builder must assume all liability for safe
construction, safety features and operation of theCADDigger. CADplans is not responsible
for typographical errors. |
| |
