- CADPlans has developed model 608, 610 and 628 sized to fit the
numerous requests for a machine that suits the customer's needs. Similar
to the Model 728, these machines can be built by the homeowner. NO
Machining is necessary using common shop tools only. The Model 608 fits
your "mini diesel" or larger Category I hitch equipped
tractor; the Model 610 lets you use the Model 608 as a 3-point hitch or
freestanding; the Model 628 is a freestanding version that needs no
tractor, can be converted to a trailer and can move itself around the
work site with the bucket.
- With 5 feet of digging depth and bucket width of 5 1/2" to
15" makes these machines perfect for the
electrician/plumber/landscaper. Simple assembly with the available kits
decreases assembly time to as little as 50 hours. Low cost, easily
available components insures simple constructions. Three models to
choose from lets one of these machines fit your needs. The smaller size
keeps your cost down and guarantees the machine can fit where it needs
to go. You are quickly productive with a low investment.
|
- CADDigger Model 608 Technical Specifications
|
| Width at Stabilizers, Min.
|
- 45"
|
- Frame Length
|
- 27"
|
- Tire Size
|
- N/A
|
- Width at Stabilizers, Max.
|
- 78"
|
- Reach
|
- 93"
|
- Engine
|
- Tractor
|
- Width w/out Stabilizers
|
- 37"
|
- Digging Depth
|
- 60"
|
- Hydraulic Pump
|
- 2-4 GPM
|
- Height to Seat
|
- 36"
|
- Ripping Power, Bucket
|
- 2,600 lbs.
|
- Operating Pressure
|
- 1,900 PSI
|
- Loading Height
|
- 60"
|
- Lateral Swing
|
- 120 degrees
|
- Oil Tank
|
- N/A
|
- Minimum Length
|
- 40"
|
- Bucket Width
|
- 5.5" to 15"
|
- -
|
- -
|
|
| *NOTE: construction time can be cut
in half by using available kit. |
NOTICE: as CADplans cannot control
the skills of the builder, or the end use of the machine, CADplans makes no warranty
stated or implied and the builder must assume all liability for safe construction, safety
features and operation of the CADDigger. CADplans is not responsible for typographical
errors.
|
- All CADDigger orders
include the following:
|
- Spiral bound plans, including written instructions,
raw material requirements, purchased equipment specifications (generic and part numbers)
and photos
- Instructional video
- Itemized price lists from the steel and hydraulics
vendors with various kit combinations available
|
