- CADPlans has developed model
608, 610 and 628 sized to fit
the numerous requests for a machine that suits the customer's needs. Similar to the Model
728, these machines can be built by the homeowner. NO Machining is necessary using common
shop tools only. The Model 608 fits your "mini diesel" or larger Category I hitch
equipped tractor; the Model 610 lets you use the Model 608 as a 3-point hitch or freestanding; the
Model 628 is a freestanding version that needs no tractor, can be converted to a
trailor and can move itself around the work site with the bucket.
- With 5 feet of digging depth and bucket width of 5
1/2" to 15" makes these machines perfect for the electrician/plumber/landscaper.
Simple assembly with the available kits decreases assembly time to as little as 50 hours.
Low cost, easiily available components insures simple constructions. Three models to
choose from lets one of these machines fit your needs. The smaller size keeps your cost
down and guarantees the machine can fit where it needs to go. You are quickly productive
with a low investment.
|
- CADDigger Model 610 Technical Specifications
|
- Width at Stabilizers, Min.
|
- 45"
|
- Frame Length
|
- 56"
|
- Tire Size
|
- 14" or 15"
|
- Width at Stabilizers, Max.
|
- 78"
|
- Reach
|
- 93"
|
- Engine
|
- 5 HP
|
- Width w/out Stabilizers
|
- 37"
|
- Digging Depth
|
- 60"
|
- Hydraulic Pump
|
- 2 GPM
|
- Height to Seat
|
- 36"
|
- Ripping Power, Bucket
|
- 2,600 lbs.
|
- Operating Pressure
|
- 1,900 PSI
|
- Loading Height
|
- 60"
|
- Lateral Swing
|
- 120 degrees
|
- Oil Tank
|
- 3 Gal
|
- Minimum Length
|
- -
|
- Bucket Width
|
- 5.5" to 15"
|
- -
|
- -
|
|
| *NOTE: construction time can be cut
in half by using available kit. |
| NOTICE: as CADplans cannot control
the skills of the builder, or the end use of the machine, CADplans makes no warranty
stated or implied and the builder must assume all liability for safe construction, safety
features and operation of the CADDigger. CADplans is not responsible for typographical
errors.
|
|
|
- All CADDigger orders
include the following:
|
- Spiral bound plans, including written instructions,
raw material requirements, purchased equipment specifications (generic and part numbers)
and photos
- Instructional video
- Itemized price lists from the steel and hydraulics
vendors with various kit combinations available
|
