| NOTICE: The CADDigger Model 650 is designed
specifically for the CADTrac. The Model 650 is like the other 600
Series CADDiggers except for a few unique features. The 650 slides
into the CADTrac's keel frame tube and is held in place by 2 bolts. It
is powered by the CADTrac's hydraulics. It also has hydraulic
stabilizers. The addition of the Model 650 makes CADTrac a unique
excavating machine. To remove the Model 650, you remove 2 bolts, pull
one pin, uncouple the hydraulics and drive CADtrac away.
As CADplans cannot
control the skills of the builder, or the end use of the machine, CADplans makes no
warranty stated or implied and the builder must assume all liability for safe
construction, safety features and operation of theCADDigger. CADplans is not responsible
for typographical errors.
|
