| SPRAY AND PUMP TECHNICAL SPECIFICATIONS |
| 3 hp motor required |
6 gal per min. |
| 30-50 gal tank capacity |
1 nozzle (Yes, only one!) |
| Pull by lawn mower, ATV, or small
tractor |
Plans included for trailer mount, truck
mount and tractor PTO |
|
 |
| CADplans will supply: |
- 14 pages of scaled, dimensioned drawings drawn
with computer (CAD) software.
- Detailed step by step instructions that
include:
- Version Selection
- Construction Steps
- Checklist prior to operation
- Operating instructions
- Sources for obtaining parts
- Variations for other uses
- How to obtain technical assistance for your questions
- Photos of finished SPRAY & PUMP.
|
| You will supply: |
- Approximately 20-40 hours of labor.
- About $200 - $300 in raw materials.
|
| ...And you're in business! |
|
- 7 WAYS SPRAY & PUMP IS BETTER THAN
SPRAY RIGS
- YOU CAN BUY!
|
| 1) |
No
Boom Needed - Uses a single unique nozzle to spray up to 40 ft. wide. |
| 2) |
Fast
Coverage - Covers acres an hour when pulled by a lawnmower, ATV or tractor. |
| 3) |
Hedge
Row Control - Can spray to one side only 20 ft. for brush control. |
| 4) |
Hand
Wand Operation - Can be used with a hand wand for selective application. |
| 5) |
Irrigation
- Is set up to be connected to irrigate your garden. |
| 6) |
De-Water
- Is set up to allow the pump to be used for water removal. |
| 7) |
Firefight
- Add the right hose and nozzle and SPRAY AND PUMP is a mini fire fighter. |
